VIPSolutions

VIPSolutions logo ✨ VIPSolutions

Home Dashboard Ask AI Archive

give answer in 2 step with explanation at the end of each step and final answer at the end:Certificate of Calibration Welch Allyn Inc. Sep 19,2025 4341 State Str Dl Son ee Ron Next Recommended Calibration Due Sep 19,2028 NY 131530220 USA Date (3 year intervals): (Contact Hans Rudolph for Re-Certification) Device | WELCH ALLIN ING, Ei oo Device includes four (4) independent Description & | TEST VOLUME REPAIR FIXTURE | Device Description: PIN: PIN 407672 ‘volumes of 100, 250, 500 & 500 ml N Volume: [0 ml per volume 6217 Accuracy Requirements: | | Volume' [0mipe Solum Procedure/Method for Calibration: Physical measurement of ach cylinder volume diameter and length. Cylinder manufacturing {tolerances are 003" an diameter and +005" on length, Min/Max volume calculations yield +1.6 mi. All cylinders must be within manufacturing tolerances Validation of Calibration Method: HRI has validated the Calculation Method per the HRI procedure, referenced as TM/960338 in accordance with ASTM E 542 at 20° C. Uncertainty is expressed in milliliters (ml) for ATE (Acceptance Test Equipment) and for ‘TM/960338. The collective uncertainty of the measurement standards and the procedure is less than 25% of the required specification for the WA test volumes. 100 ce CYLINDER 250 ce CYLINDER FEATURE [Tow Low CYLDIAG 2.500 2.506 2.500 2506 | 250 S00 cc CYLINDER HIGH 250 — n a Leak

Question:

give answer in 2 step with explanation at the end of each step and final answer at the end:Uploaded ImageCertificate of Calibration Welch Allyn Inc. Sep 19,2025 4341 State Str Dl Son ee Ron Next Recommended Calibration Due Sep 19,2028 NY 131530220 USA Date (3 year intervals): (Contact Hans Rudolph for Re-Certification) Device | WELCH ALLIN ING, Ei oo Device includes four (4) independent Description & | TEST VOLUME REPAIR FIXTURE | Device Description: PIN: PIN 407672 ‘volumes of 100, 250, 500 & 500 ml N Volume: [0 ml per volume 6217 Accuracy Requirements: | | Volume' [0mipe Solum Procedure/Method for Calibration: Physical measurement of ach cylinder volume diameter and length. Cylinder manufacturing {tolerances are 003" an diameter and +005" on length, Min/Max volume calculations yield +1.6 mi. All cylinders must be within manufacturing tolerances Validation of Calibration Method: HRI has validated the Calculation Method per the HRI procedure, referenced as TM/960338 in accordance with ASTM E 542 at 20° C. Uncertainty is expressed in milliliters (ml) for ATE (Acceptance Test Equipment) and for ‘TM/960338. The collective uncertainty of the measurement standards and the procedure is less than 25% of the required specification for the WA test volumes. 100 ce CYLINDER 250 ce CYLINDER FEATURE [Tow Low CYLDIAG 2.500 2.506 2.500 2506 | 250 S00 cc CYLINDER HIGH 250 — n a Leak

This is AI generated Response.
Asked by: Rahul
Created at: 2025-12-17 15:35:55

Final Answer:

Rendered Raw Text
Did you like this answer?
## Step 1: Identify the Calibration and Device Details **Explanation:** From the certificate, the **calibration date** is **Sep 19, 2025**, and the **next recommended calibration due date** is **Sep 19, 2028** (3-year interval). The **device** is a "Test Volume Repair Fixture" (P/N 407672), serial number **6217**, made by **Welch Allyn Inc.** The device includes four independent cylinders (100, 250, 500, 500 ml), with a volume accuracy requirement of ±10 ml per volume and leak specification of < .2 ml/min @ 260 mm Hg. --- ## Step 2: Review Calibration Results and Pass/Fail Status **Explanation:** The table shows the **actual measurements** for each cylinder (diameter and length), and all values fall within the specified tolerances. The bottom section confirms that the leak rate is < .2 ml/min and the technician has marked the test as **Pass**. --- ## Final Answer **The device passed calibration on Sep 19, 2025, meeting all specified requirements for volume accuracy and leak rate, and is certified for use until the next calibration due on Sep 19, 2028.**

Question:

All parts solved please

This is AI generated Response.
Asked by: Rahul
Created at: 2025-12-17 15:36:19

Final Answer:

Rendered Raw Text
Did you like this answer?
# Calibration Certificate Analysis ## Step 1: Identify the Calibration and Device Details **Explanation:** From the certificate, the **calibration date** is **Sep 19, 2025**, and the **next recommended calibration due date** is **Sep 19, 2028** (3-year interval). The device is a "Test Volume Repair Fixture" (P/N 407672), serial number **6217**, made by **Welch Allyn Inc.** The device includes four independent cylinders with volumes of **100 ml, 250 ml, 500 ml,** and **500 ml**. The volume accuracy requirement is ±10 ml per volume, with a leak specification of < 0.2 ml/min @ 260 mm Hg. --- ## Step 2: Review Calibration Results and Pass/Fail Status **Explanation:** The table shows the **actual measurements** for each cylinder (diameter and length), and all values fall within the specified tolerances. The bottom section confirms that the leak rate is < 0.2 ml/min, and the technician has marked the test as **Pass**. --- ## Final Answer **The device passed calibration on Sep 19, 2025, meeting all specified requirements for volume accuracy and leak rate, and is certified for use until the next calibration due on Sep 19, 2028.**

📢 Instructions:

  • Ask anything relatd to above question only.
  • For new Question goto :
    Ask AI

Related Answers

Study Help, Fast Answers

VIPSolutions focuses on clear, step‑by‑step explanations so you can learn quickly. Whether you need an AI‑generated walkthrough or a short hint to get unstuck, each solution is organized for fast reading and easy review later.

Search similar questions, compare approaches, and bookmark the best answers for revision. Our goal is simple: quick, reliable study help that feels natural—not noisy.